Industrial flame monitoring solutions for gas turbines, boilers, flares, kilns, ovens, burners and beyond
Reuter-Stokes' Flame Detectors are designed for monitoring a wide range of industrial burners and equipment including:
- Gas Turbines
- Industrial Boilers
- Steam Methane Reformers
- 封闭的地面Flares
- Drying Kilns
- Industrial Ovens
Unlike IR sensors,UV flame scannersrespond more quickly to changes in flame status because they are not subjected to black body radiation and lack the inertial memory of a thermocouple. Users rely on Reuter-Stokes flame sensors for proper operation of gas turbines and other critical infrastructure and are ideal in situations where other service-prone technologies, like thermocouples, tend to fail.
Top-fired steam methane reformers tend to use flame sensors for start-up only and expect them to fail before operations are ramped down, while traditional sensors installed in areas with excessive heat tend to burn out. Our Flame Trackers continue tooperate throughout a plant’s lifecycle without the need for replacement, as they are designed to withstand temperatures beyond the range required for methane reformers.
Reuter-Stokes’ Flame Tracker sensor, based on Silicon Carbide (SiC) technology,improves gas turbine performance while significantly reducing maintenance requirements. The Flame Tracker's high sensitivity to longer UV wavelengths gives it a wide dynamic range and quick response time,最小化假熄火and improving turbine reliability.
The Flame Tracker model features these benefits:
- Provides reliable operation
- Eliminates signal flicker
- Allows full operation during the water wash cycle
- Reduces maintenance time
- 作用于低电压
- Provides rapid response to flameout
- Produces a wide dynamic range
- Delivers 10 times the sensitivity of tube-style sensors
OurReuter-Stokes Flame Tracker DryFTD325senses ultraviolet (UV) wavelengths produced by a flame and signals whether a flame condition exists. This rugged design reduces maintenance by moving sensitive electronics away from heat, thereby eliminating the need for water cooling. TheSilicon Carbide (SiC)optical photodiode is designed for use with multiple fuels, low NOx combustors, and steam injection.
The Flame Tracker Dry is an OEM solution and can replace any Reuter-Stokes Flame Tracker in situations in which the end-user prefers toupgrade from water-cooled to dry sensor technology.
Ideally suited for steam methane reformers, the Flame Tracker Dry FTD325 isespecially useful for top-fired systems that produce excessive heat near instrumentation, which can produce a high failure rate. Instrument housing on top of the reformer can reach 150 degrees C, whereas the FTD325handles temperatures up to 325 degrees C. This ensures that operators always have critical information about the flame in the reformer, reducing the high volatility risk while lessening the danger of a devasting explosion caused by the presence of methane or syngas when the flame is extinguished.
Flame Tracker EGFis designed for use with enclosed ground flares where traditional thermocouples can fail to provide reliable, accurate information due to the system’s slow response and higher failure rate. A UV sensor’s line-of-site measurement providesa nearly instantaneous readingof the flare’s pilot status that immediately tells operators that the pilot has been extinguished.
Gas turbines power much of our world today. To sustain reliable power supply, gas turbine operating conditions must becomprehensively safeguarded to protect productivity, profits and most importantly, lives. Front and center to mitigating risks in the harsh, high-temperature, and high-stakes gas turbine environments are flame sensors. Monitoring combustion flame condition with immediate, automated fuel shut-off for flameouts, is crucial to ensure safe gas turbine operations and prevent potentially catastrophic events.When it comes to flame monitoring, however, all are not created equal.
The high-heat, hard conditions of gas turbine operations inspired the design of dry UV flame monitoring technology. As a result, the technology utilizes remote electronics,eliminates risks of water leaks, reduces water lines and associated costs, simplifies outage activity, and related labor costs. The benefits speak for themselves and the installations are yet another proof point in the adoption of dry, UV flame monitors for gas turbines.
When you put it all together, you begin to seewhy we are the preferred OEM solution for some of the largest Gas Turbine manufacturers in the world.
Across industrial operations, managing and safeguarding your most critical machinery is a top priority. In plants using fired process equipment (i.e. boilers), these assets areuniversally regarded as among the most crucial to manage and control.Why? Because safety, productivity, and profitability rely heavily on the proper operation of highly critical fired process equipment.
Due to the inherent nature of fired operations,manufacturing conditions are typically harsh, high temperature, and high stakes. Front and center to mitigating risks in the challenging industrial manufacturing environments that employ fired equipment, are flame sensors. Monitoring combustion flame conditions with immediate, automated fuel shut-off for flameouts is crucial to ensure safe operations and prevent potentially catastrophic events.
Withour extensive track record in delivering reliable sensors in harsh environments, a track record that使我们有别于competitionwith their limited temperature ranges, you canattain real peace of mindwhen it comes to monitoring your fired process equipment.
Ideally suited for steam methane reformers, theFlame Tracker Dry FTD325 is especially useful for top-fired systems that produce excessive heat near instrumentation, which can produce a high failure rate. Instrument housing on top of the reformer can reach 150 degrees C, whereasthe FTD325 handles temperatures up to 325 degrees C. This ensures that operators always have critical information about the flame in the reformer while reducing high volatility risk and the very real danger of a catastrophic explosion caused by the presence of methane or syngas when the flame is extinguished.
Flame Tracker EGF is designedfor use with enclosed ground flares where traditional thermocouples can failto provide reliable, accurate information due to the system’s slow response and higher failure rate - and in an industry-leading response time. With our Flame Tracker EGF, you canrespond to your flame out status in seconds, not minutes. A UV sensor’s line-of-site measurement provides anearly instantaneous readingof the flare’s pilot status that immediately tells operators that the pilot has been extinguished.
Performance benefits of the Reuter-Stokes Flame Tracker EGF include:
- Provides reliable operation when using virtually any fuel
- 响应迅速引燃火焰的变化
- Easy installation outside the enclosed ground flare
- High sensitivity for low-light operation
Managing and safeguarding your critical production machinery is always a top priority. In plants using fired process equipment such as kilns and ovens, these assets are oftenregarded as among the most crucial to manage and control.
Kiln and ovenmanufacturing conditions are typically harsh, high temperature, and high stakes. Therefore, durable, rugged flame sensors are crucial to mitigating the risks found in these challenging industrial manufacturing applications. Monitoring these combustion flame conditions with immediate, automated shut-off capabilities is crucial to ensuring safe operations and the prevention of potentially catastrophic events.
Withour extensive track record in delivering reliable sensors in harsh environments, a track record that使我们有别于competitionwith their limited temperature ranges, you canattain real peace of mindwhen it comes to monitoring your fired process equipment.
