WT Bond Scanner

Bond Scanner

Inspection bond conditions on a new level

The Bond Scanner from Waygate Technologies allows for fast, easy, reliable, and repeatable testing of bonded parts. It eliminates scrap and with its phased array technology and flexible design, guarantees full coverage of the bond line or seam.



Fast, easy, and accurate inspection of adhesively bonded joints starts here

The Bond Scanner is simply clamped on the two body panels joined by a seam bond. The innovative array design enables the array to adapt also to contoured parts as commonly used in automobile designs and covering bond lines up to 32 mm in width.

Since the spring-loaded encoder wheel is located on the other side of the plate combination a firm and stable position of the array can be realized. The specially designed protection foil reduces the needed couplant to a minimum and enables a manual, one-handed scanning. Complete sections of car body bond seams (e.g. on hoods, doors or other mounted parts) can be inspected in just one scan. Knowing if your parts are adequately bonded increases productivity and ensures that product safety and quality standards are met every time.

This solution allows the inspector to evaluate the bond seams’ overall width and identify misaligned bond lines or areas that lack adhesive. The Bond Scanner can be used in all industry sectors where bond lines must be assessed.

Highlights


Benefits

  • Fast Results
  • Accurate Analysis
Features

  • Flex Bond Scanner allows for easy inspection of complex geometries that are increasingly found in modern car designs
  • Adjustable Bond Scanner examines many different bond seam geometries with just one probe
  • Advanced Bond Scanner provides the detail that any next-level quality standard might require with 64 elements and 0.5 mm / 20 mil pitch
Applications

  • Adhesives in the automotive and other industries
The Bond Scanner Portfolio
Flex Bond Scanner

This innovative scanner allows for easy inspection of complex geometries that are increasingly found in modern car designs. The convexly pre-bent array design of the LA-10, 32-element flex scanner can be adapted to both concave and convex curvatures, with a bending radius of approximately 80 mm or 3.2” and the ability to inspect the A side-edge bond lines up to 32 mm or 1.3” wide

WT Flex Bond Scanner
Advanced Bond Scanner

When even higher resolution is required, the Advanced Bond Scanner isthe perfect solution. With 64 elements and 0.5 mm / 20 mil pitch, it provides the detail that any next-level quality standard might require.

WT Advanced Bond Scanner
Adjustable Bond Scanner

This flexible scanner examines many different bond seam geometries with just one probe. It can be adapted to inspect adhesive bonds with widths varying from 8 to 20 mm or 0.315” to 0.787” of the A and B side-edges. Note: Flat coupling surfaces are necessary to ensure proper coupling of the probe to the near-edge surface under inspection.

WT Adjustable Bond Scanner
Pair Bond Scanner with Krautkrämer Mentor UT

For consistency across the inspection process, Bond Scanners are ideally paired with the Krautkrämer Mentor UT flaw detector. The user-defined workflows walk the inspector through every step of instrument setup — from probe selection and calibration to reporting.

With the Mentor PC Live software, the instrument is connected to a PC through Wifi or ethernet which is especially helpful when the operator is at a different location.

Mentor PC Live performs the instrument’s functions from the PC, with the bonus that setup and data files are saved directly on the PC.Bond Scanner is also available separately.

Pair Bond Scanner with Krautkrämer Mentor UT

Bond Scanner Adjustments

如何视频eo: Adjust array from 8 to 20mm width Video

You might also like



WT Splitter Box

The Splitter Box

Allows to connect multiple Bond Scanner Probes to the Mentor UT. This flexible solution allows the operation with different probes at the same time without disconnection and connection of probes during the inspection.

The Splitter Box consists of a “Base Box” that is connected do the Mentor UT device.

To connect the two Bond Scanner probes LA-10 32 Flex and LA-10 32 8-18, two 32 Element Channel Boxes are attached to the Base Box (MUX-Module required).

Part Numbers:

  • UA600638 Base box
  • UA600496 32 channels box

Get in touch with an expert.

Your request has been submitted.
Thank you for your interest. A specialist will be in touch with you shortly.